Belgian Wit Brewday (8/5/12)

For the third time in this blog/summer/year, I'm brewing a Belgian Wit.  Still hasn't come out exactly how I wanted, so I keep re-brewing

Recipe (5 gallons) 

1.046 O.G.

1.010 expected F.G

4.8% ABV

Malt:

4.5# German Pilsner (51%)

3.5# Unmalted Wheat (40%)

12 oz. Flaked Oats (9%)

Hops: (19 IBU's)

9 grams Nugget (15.1%AA) @ 90 Minutes

Yeast:

Wyeast 3944 Belgian Witbier

Spices (added at flameout):

1 oz. Grapefruit Peel

.75 oz. Crushed Indian Coriander

1 tablespoon flour to add haze

Mash/Boil:

Usually I've done a cereal mash when using unmated wheat, but since my grains were already crushed together, I decided to use a single decoction to break down the adjuncts.  I'm not going to pretend I really understand what "breaking down" the unmalted adjuncts means, but I know that adjuncts aren't modified enough during malting to be used in a single infusion mash.

1). I mashed in at 122 degrees for a protein rest at a 2 qts/lb ratio:

I'm using my kettle as a mash tun, so I can add heat directly if needed.

2.) After one hour of protein rest, I pulled the first decoction.  I used one quart of thick mash per pound of grain, which was 24 fills of this pyrex measuring cup:

Mostly grain is pulled from a decoction, but the small amount of liquid that comes along should be okay. 

3.) After my thick 30-40% of the mash was pulled into a separate kettle, I began the 30 minute decoction.  The schedule was:

122-150 degrees in the first five minutes

150-170 in the second five minutes

170-boiling in the third five minutes

boil for 15 minutes

The first video shows the beginning of my boiling decoction.  The second video is towards the end of the 15 minute boil, and you'll notice the grains are much darker and softened.

4.) After my 30 minute decoction, I slowly added the grain back until the mash reached my sacchrification temp of 150.  I actually needed to apply a bit of heat since I undershot my temp.

5.) After resting at 150 degrees for one hour, I applied heat to the brew kettle until I reached a mash out temp of just below 170. I poured the mash into my lauter tun (aka my cooler mash tun I use on most brews), rested for 15 minutes, then treated the mash just like any other batch sparge. Vorlouf, lauter, and sparge until I reached 7 gallons.

6.) Boil for 90 minutes, add hops and spices, chill, oxygenate, pitch yeast.  Ferment at 73 degrees ambient.

Jean-Claudde Van DAYUMM! Brewday 8/15/12

As I was prepared to keg my Belgian Pale Ale last weekend, I had two thoughts.  One was that I should re-use the Belgian yeast, and the second was that with three session strength, pale beers on tap, I could use some dark flavor to mix things up a bit.  So with that, and the fact that I recently drank and enjoyed Allagash Black, I decided to make a black Belgian Stout.

After trying to think of a notable black Belgian to make another celebrity pun-named beer, I realized the only well known Belgian person is the Mussels from Brussels, Jean-Claude Van Damme.  Sure, he's white, but I can bring this thing all together with the following clip that came forward from the depths of my memory:

Since I found an excuse to bring up the great Jean-Claude in a beer blog, I might as well post a clip of his finest work; a fight to the death with a penguin-suited mascot in the 1995 classic Sudden Death:

The Beer:

I wanted this stout to be big at 7.5% ABV but with a dry mouthfeel of a Belgian ale.  The recipe has big stout characteristics with oatmeal, roasted malts, and a high O.G, but is mashed low at 148 and dried out further with table sugar and D-180 Dark Candi Sugar Syrup.

D-180 Dark Candi Sugar syrup.  Taste is really sweet, with a dark, fig-like sweetness that tastes distinctly Belgian.  

For hops, I decided to add a small amount of Serebrianka for the fruity, tobacco complexity I blogged about before.  I used just a small amount, so if I can adjust the level through dry-hopping when I keg it. The yeast is Wyeast 1214 Belgian Abbey, which I used last week for my Belgian Pale Ale.

Recipe (5.5 gallons):

Malt/Fermentables:

9.5# Belgian Pilsner Malt (67%)

1.5# Torrified Wheat (11%)

12 oz. UK Chocolate Malt (5%)

8 oz. Roasted Barley (4%)

8 oz. Oats (4%)

1# Candi Syrup 180-D (7%)

8 oz. Table Sugar (4%)

Mash:

Single Infusion, 148 degrees, one hour. 1.25 qts/lb.

I always love drinking the first runnings of a dark beer.

Hops (41 ibu's)

.75 oz. Nugget, 15.1% AA @ 90 minutes

.25 oz Nugget, 15.1% AA @10 minutes

.5 oz Serebrianka, 3.5% AA @10 minutes

Yeast:

Wyeast 1214 Belgian Abbey re-pitched from previous batch.  

Session Gold Ale Recipe and Brew Day (5/12/12)

The idea for this beer came to me earlier this week.  It's not anything earth shattering.  It's just a beer I envisioned in my head without the guidance of any style or experiment in mind. It's the beer I wanted to be drinking at the moment.  It turns out the recipe is a standard English session ale, but I've never drank one in real life.  I just envisioned the flavors and aromas in my head, and then went ahead and made it.

Even though this single malt, single hop recipe is as simple as it gets, I was excited about this creative process.  It got me thinking of the deeper philosophical questions.  Like, is brewing an art?  My first instinct is to say no, but I'm not sure either way.  I'll probably ponder that more on a future post, but feel free to leave a comment on what you think.

Anyway, the beer I'm brewing is a golden session ale.  Something light and refreshing for the warmer months.  It uses my favorite English yeast, London ESB, along with Golden Promise malt and US Goldings for hops.  I mashed a bit thinner than usual so I didn't have to sparge as much.  This, along with a low sparge temp of 168 should keep all the harsher grain notes out.

 I expect this to be crystal clear and pale with a white head.  It should taste and smell fruity and leafy with a delicate, toasty malt note.  At about 3.5% ABV, it's a true session ale which means you could house like a hundred of them if you wanted to.  Here it is:

Recipe (6 gallons):

Planned O.G: 1.038

Planned F.G: 1.011

IBU: 32

ABV: 3.8%

Malt:

9# Golden Promise (100%)

Mash 152 degrees at 2 qt/lb for 30 minutes.  

Collect about 2 gallons of recirculated first runnings. 1.055 OG

Add 6 gallons of 180 degree water to mash, resting at 168 for 15 minutes.  Collect recirculated runnings to get to 8 gallons in the kettle.

 Boil wort for 90 minutes, adding the following hop schedule.  Cool to 65 degrees and pitch yeast.







Hops (32 IBU's):


1.25 oz. US Goldings (5.7% AA) at 90 minutes
1 oz. Goldings at 10 minutes
1 oz. Goldings at flameout
1 oz. Goldings dry hop

Yeast:


1L starter of Wyeast 1968 London ESB.  Pitching rate according to Mr. Malty.  Ferment at 65 for one week, add dry hops for a week, then keg.

Original gravity reading: 1.040. Slightly higher than expected.

Double White Ale Tasting & Recap

Brew Date: 3/24/12

Tasting Date: 5/7/12

The first few "tasting & recap" posts will be for beers that I brewed before the start of this blog, so I'll introduce them quickly with the recipe before getting into the results.

Recipe (6 gallons)

O.G.: 1.062

F.G.:  1.011

ABV: 6.8%

IBU: 22

Malt:

5# Pilsner (40%)

5# Wheat Malt (40%)

1# Torrified Wheat (8%)

1# Oats (8%)

8 oz. Table Sugar (4%)

Mash @ 148 degrees for one hour

Hops:

1/2 oz. Nugget (15.1% AA) @ 90 minutes

Yeast:

Wyeast 3463 Forbidden Fruit pitched from previous batch

Adjuncts:

1 oz. Fresh ground Indian coriander at flameout

1.5 oz. Minolla orange peel at flameout

Results!

So far, the feedback for all of the wit beers I've brewed have been positive to very positive.  But for me, I'm never quite happy with them.  Yes, I've made them light, tight, and refreshing with a prominent orange and coriander note.  But I have still yet to make one that is on the level of Allagash White, Hoegaarden, or Southampton Double White (which inspired this beer).  I wish my first "results" post was a homerun, but as former Jet's coach Herm Edwards says, I must "put my name on it" and explore what went right and what went wrong with this one.

Apperance:

While the beer isn't nearly as cloudy as it's supposed to be, I'm happy with how it looks.  Bright pale color, creamy white head and a lot of lacing.  There's a few tricks to fix the cloudiness level, so I'll try those next time.  Not perfect, but it's appetizing.

Aroma:

I feel like I hit the aroma really well.  The spice level in most wits is either too much or too little, but here I've hit the perfect level for intensity.  The Indian coriander I used smells outstanding when it's freshly crushed, but it comes out even better alongside the yeast notes on a wit.  It's citrusy, with a distinct peppercorn note.  If you've ever smelled pink peppercorns, it reminds me most of that.  The orange peel is on the subtle side, which is how I like it.  My biggest problem with Blue Moon and Shocktop is that the orange smells artificial, and when they put add another orange peel to the glass it gets overwhelming to the point where the beer has become an air freshener.  I feel the citrus component can be played around with on subsequent versions of this, but I like where this is at.

Flavor:

Everything checks out about this beer until about mid palate.  Looks good, smells great, and has the tight zip on the front palate that you'd expect.  The beer tastes refreshing, and has a wheaty, breadiness to it, but the aftertaste has a lingering off flavor.  I'll get into more of the specifics of all my wit beer tinkering in future posts, but on this version I tried replacing some of the unmalted wheat with malted wheat.  This, I think, led to a less traditional wheat flavor than a classic wit.  There is also less yeast and spice character than the nose.  And I'm not sure if the malted wheat experiment had anything to do with this, but the tartness traditionally added from wheat is a bit overwhelming, and not in an enjoyable way.  This tartness is felt mostly in the aftertaste, which takes the refreshment factor down a little bit.  Still, for an almost 7% abv beer, this is really drinkable, but I think some of the flavor intensities should be shifted towards the yeast and spices instead of the malt.

Overall:


I like this beer, and other people like it too.  But it's not perfect. This keg probably won't last too much longer, which is a success in some ways, but I still wouldn't brew it again.  The next wit I make will have a completely different recipe, so stay tuned.  In the meantime, don't use malted wheat in a wit beer.  It doesn't give the right wheat flavor.

Kelly RIPA! Rye IPA Recipe

My first blog post here happens to be for one of the very few beers I make that have a pun name.  I don't like pun names because most of them are just a lame play on the word "hop" and they have been played out to death by breweries and homebrewers.   Why am I making an exception for this Rye IPA (shortened: RIPA)?  Is it because I'd like to enjoy this beer with the host of Live! with Kelly Ripa?  Or maybe it's a fun reference to this great joke from Scrubs?

The answer is just a coincidence of names that makes me laugh.  It's funny in a random way, much like that Scrubs clip.  But, if by some strange chance Ms. Ripa reads this post and wants to get wicked Ripa'd with me, I'm totally down.  Let's do this, girl! Kelly Ripa!

*SNAP!*

The Beer:

The idea for this beer is to make a hoppy American IPA with the added malt depth from rye.  The only rye beers I've had were Hop Rod Rye from Bear Republic and Ruthless Rye from Sierra Nevada.  I also once brewed a RIPA that came out great, which is my only other pun-named beer, Rye So Serious?.

All of these beers have potent hop noses, but with a deep malt character that you don't get from a typical IPA.  Usually when someone refers to an IPA as "balanced", they really mean "not that great".  A good IPA (to me) has a moderate to heavy bitterness, and an over the top, hoppy aroma.  A bad IPA (to me) has low aromatics, and are usually under-attenuated.  The Rye IPA is the exception to the "balanced rule".  Instead of a heavy, caramelly sweetness from crystal malts, a good RIPA has a spicy, bready character from the rye malt.  

This recipe is based off the previous RIPA I brewed (Rye So Serious?), but with some tweaks that I think will improve the outcome.  The last RIPA had an intense hop nose of Cascade and Centennial, giving off a candy-like fruitiness.  I used 16% rye in the malt bill, which gave me a nice rye accent that I thought could be higher.  The following recipe has a higher percentage of rye (20%) and a different hop bill.  

Recipe (6 gallons):

Planned O.G: 1.060
Planned F.G: 1.015
IBU: 63
ABV: 6.1%

Malt:

11# American Pale Malt (75%)
3 # Rye Malt (20%)
8 oz. Crystal 60L (3%)
4 oz. Black Patent Malt (2%)
8 oz. Rice Hulls (non fermentable, used to prevent stuck mash)



Mash 154 degrees at 1.25 qt/lb for 30 minutes.








Collect 1.5 gallons of recirculated first runnings

Add 6.5 gallons to mash at 185, rest at 170 for 10 minutes, collect  recirculated second runnings to reach 8 gallons in kettle.







Boil for 90 minutes, adding the following hop schedule. Wort reduced to 6 gallons. After boil, whirlpool and chill wort.

















Hops:


1.25 oz each of Cascade (leaf, 8.6% AA), Nugget (leaf, 15.1% AA) @ 20 minutes
1.5 oz each of Cascade, Nugget @ 5 minutes
1.5 oz each of Cascade, Nugget for dry hop after fermentation


Yeast:


Wyeast American Ale 1056. Top cropped from previous batch, refrigerated for one week and put into a 1 Liter starter




Original Gravity: 1.057
30 minutes of oxygen pump, pitch yeast at 65 degrees, ferment at 65.







See this recipe on hopville: Kelly RIPA!